Tinning Operation Of Push In Terminal Blocks
The surface of push in terminals with clamping screws after tin plating is silvery white. This push in wire terminal block can better prevent oxidation and conduct electricity, and this push wire term
Equipment For Cleaning Cold Press Pin Crimpers
Turn off the power of the contact crimper device, clean the metal chips, oil stains, etc. on the d sub contact crimper device, and check all parts of the contact crimping tool device to ensure that th
Insert The Wire Into The Cold Pressing Needle
Insert the stripped wire end into the slot in male crimp contact. Make sure the wire is inserted deep enough to ensure good contact with the inner conductive material of crimp contact. Be careful not
What Should I Pay Attention To When Removing The Pins Of Heavy Duty Connectors?
heavy duty waterproof electrical connectors Pin Removal Instructions When replacing the wires on the heavy duty connector or repairing the heavy duty electrical connectors, it's necessary to remove th
Check The Wiring Of The Heavy-duty Connector
Check the wiring of wire connector heavy duty: Check whether the wiring of heavy duty electric cable connectors is firm. If the wiring of heavy duty automotive electrical connectors is fine, heavy dut
Tightening The Housing Screws Of Heavy-duty Connectors And Precautions
Tighten the housing screws of heavy duty industrial connector: Close the housing of heavy duty male female connector, and then tighten the housing screws of heavy duty multi pin connectors with a scre
Heavy-duty Connector Crimping And Precautions
Crimping: Insert the stripped heavy duty crimp connectors wire into the cold-pressed terminal, and then use a wire crimping pliers to press the cold-pressed terminal onto the heavy duty waterproof ele
Opening The Housing Of Heavy Duty Connectors And Stripping Wires
Opening the heavy power connector case: Open the heavy duty wire connectors case to expose the terminals inside the wire connector heavy duty. Note that before opening the heavy duty electric cable co
Research On The Impact Of Warranty Period Differences On The Energy Storage Connector Aftermarket
Market regulations suggest that overseas warranty requirements for energy storage connector products are much higher than domestic ones—typically 15-20 years, while domestic warranties for battery sto
Use Professional Instruments To Diagnose Push-type Terminal Block Connectors
Use professional electronic equipment to conduct a more in-depth diagnosis of push wire terminal block, including checking push in terminal block wire connector operating current, voltage and other pu